HRN-BS04A1
Adapter harness, needed in conjunction with HRN-DS09T2, HRN-DR09T2 or HRN-GS09K2-A on 2017 Kenworth and Peterbilt trucks for enhanced engine data support.
HRN-BS16S5
OBDII extension harness for GO devices - 1.5 meters in length
HRN-BU16Y5
OBDII harness for GO devices. Special vehicle connector to receive engine data from Mitsubishi Fuso (medium duty) vehicles.
HRN-CE10A2
Custom proprietary adapter for Volvo/Mack FMS vehicles in North America. Requires HRN-CM24Y1.
HRN-CH06A2
Custom Proprietary HINO FMS adapter. Requires HRN-CM24Y1.
HRN-CK10A2
Custom adapter for Mack vehicles in North America. Requires HRN-CM24Y1.
HRN-CM24Y1
GO device harness for custom installs. Molex connectors for two OBD and one J1939 connection points.
HRN-CP04A2
PSM module connection for Mercedes Sprinters (907 and 910 Chassis) for global markets (requires HRN-CM24Y1)
HRN-CS14S2
4 PIN Connector harness for heavy duty applications (Refer to the Vehicle Specific Installation document for specific instructions).
HRN-CT06A1
Custom adapter for Tesla (Model S) vehicles. Requires HRN-CM24Y1.
HRN-CT06A11
Custom Tesla Model S (post 2016) & X adapter (requires HRN-CM24Y1)
HRN-CT20T1
Custom Tesla Model 3 harness
HRN-CW08A4
8-wire adapter for vehicles with connectors that are not supported on any other harness. Requires HRN-CM24Y1.
HRN-DC09T2
Special harness for CAT off-road vehicles. Verify vehicle does not use a standard 9-pin connector.
HRN-DC14S2
14-pin harness for CAT vehicles 2016+
HRN-DR09T2
9-pin heavy-duty T-harness for installations where the Deutsch connector needs to remain available for other applications and is a THREADED dash mount style.
HRN-EE14S1
Mercedes diagnostic connector. Used on older generation medium duty trucks and buses.
HRN-GR09K1
Universal Rugged Heavy-Duty T-Harness Kit (IP67)
HRN-RMRCA1
CAT specific adapter (requires HRN-GR09K1)
HRN-RS12S2
Connects GO RUGGED to vehicle diagnostic port for engine data
HRN-RW03S4
3-wire harness for the GO RUGGED — PWR, GND, IGN.
HRN-RX06S4
Required to connect any IOX to the GO RUGGED
HRN-UP21Y2
PSM module connection for Mercedes Sprinters for global markets. Requires HRN-CM24Y1.
IOX-ALERT
IOX Add-On for GO devices to support an alert message to MyGeotab.
IOX-AUXM
IOX Add-On for GO devices for auxiliary support
IOX-BT
Bluetooth® low energy IOX Add-On, for GO devices, supporting proximity beacons with a public MAC address. Also supports select sensor-enabled beacons.
IOX-BUZZ
IOX Add-On for GO devices for an external buzzer/beeper
IOX-CAN
IOX Add-On for GO devices for CAN integrations (i.e. Mobileye and Valor)
IOX-COMSPREAD
IOX Add-On for GO devices for Rexroth Compu-Spread controllers
IOX-CRS
IOX Add-On for GO devices for Cirus Controls SpreadSmart Rx spreader controller
IOX-DJ
IOX Add-On for GO devices for DICKEY-john
IOX-GARMINNT
IOX Add-On for GO devices for Garmin PNDs requiring NO traffic services. Supports PNDs globally.
IOX-GARMINWT
IOX Add-On for GO devices for Garmin PNDs that require traffic services. Supports North America.
IOX-GOTALK
IOX Add-On for GO devices for Text-to-Speech Speaker for Driver Feedback
IOX-HID
IOX Add-On for GO devices for HID Interface (school bus)
IOX-NFCREADER
NFC Tag Reader with mounting bracket ONLY - used for Driver ID. NFC Tags sold separately.
IOX-OUTPUTM
IOX Add-On for GO devices for controlling a relay
IOX-RS232F
IOX Add-On for GO devices for RS232 support (female connector)
IOX-RS232M
IOX Add-On for GO devices for RS232 support (male connector)
IOX-SATIRDV2
IOX Add-On for GO devices for Iridium satellite support (includes Iridium modem and antenna)
IOX-USB
IOX Add-On for GO devices that allows two-way data transfer and charging of external devices. Uses Female USB Type-A connector.
SPR-RELAYKIT
Driver ID Relay kit for GO devices. Requires either a Geotab Authorized Installer or a licensed automotive electrician/mechanic.
